Canon Pixma Pro-100S Reset Utility

Canon Pixma Pro-100S printer Reset utility! This reset utility is Full Pro version is Free! No Need Any Cost or Waste Extra Time. 

Without Password Protected Zip File! But Some File Password Protected Causes for Privacy. No Tension! If you Found Password zip file then look Bellow the Download Link There Password’s

This Re setter is Working Solutions For your Canon Pixma Pro-100S Printer .This Tool is Working For Waste ink tank full, waste ink pad full, the ink absorber is almost full, error 5B00, error P07, blink 7 times, blink 8 times, the ink absorber becomes almost full, error E08, error E07 Problem.

Step By Step Instruction Bellow-

 First Enter Service Mode-

  •   Turn off Your Canon Pixma Pro-100S printer.
  •   Press and hold the Stop button.
  •   Press and hold the Power button.
  •   Release the Stop button (the Power button is still pressed).
  •   Press and releasing the Stop button 4 times.
  •   Press and hold the Stop button.
  •   Release the Power and Stop buttons together.

Reset Canon Pixma Pro-100S with Service Tool 

  • Download Service Tool (File Password:Service Tool)
  • Extract file and open Service Tool
  • Load paper
  • Clear Ink Counter, select MAIN (1)
  • Set (2)
  • Wait the printer finish printing D=000.0
  • Click OK
  • Close Service Tool
  • Turn off printer Your (wait 10 seconds)
  • Turn on Your printer
  • Ready for use Your Canon Pixma Pro-100S Printer


Leave a Reply

Your email address will not be published. Required fields are marked *