Contents
Canon G2002 printer Resetter (Reset utility)! This reset utility is Full Pro version is Free! No Need Any Cost or Waste Extra Time.
Without Password Protected Zip File! But Some File Password Protected Causes for Privacy. No Tension! If you Found Password zip file then look Bellow the Download Link There Password’s
This Resetter is Working Solutions For your Canon G2002 Printer. This Service Tool is Working For Waste ink tank full, waste ink pad full, the ink absorber is almost full, error 5B00, error P07, blink 7 times, blink 8 times, the ink absorber becomes almost full, error E08, error E07 Problem.
Step By Step Instruction Bellow-
First Enter Service Mode-
- Turn off Your Canon G2002 printer.
- Press and hold the Stop button.
- Press and hold the Power button.
- Release the Stop button (the Power button is still pressed).
- Press and release the Stop button 4 times.
- Press and hold the Stop button.
- Release the Power and Stop buttons together.
Reset Canon G2002 with Service Tool
- Download Service Tool (File Password:Service Tool)
[ If Not Working This Service Tool Look The Bottom Alternative Service Tool Download Link Available ]
- Extract file and open Service Tool
- Load paper
- Clear Ink Counter, select MAIN (1)
- Set (2)
- Wait the printer finish printing D=000.0
- Click OK
- Close Service Tool
- Turn off printer Your (wait 10 seconds)
- Turn on Your printer
- Ready for use Your Canon G2002 Printer
NB: Canon Printer Service Software Tools is an Effective Software Tool. Use of this tool may not work according to what it has been given here, please check the usage of the software tools provided here and if you do not know the rules of use and are not working according to the applicable usage rules. Remember, the Canon Printer Service Software Tool is here to offer official software. We provide it free of charge. I hope you can solve this problem through our software and save your money and time. Thank you
New Service Tool Are Bellow.
Download Service Tool (File Password:Service Tool)
